Today many people complain that the most part of the budget leaves on payment of utilities. Therefore it is no wonder that the topic how to save gas in the house, remains hot within several years. A huge number of researches in this area which will allow to find the cracks leading to loss of big money was carried out. Most of all gas leaves on heating and hot water supply, so and to save it is necessary to begin with these areas.
How to save gas at gas heating?
The first on what it is necessary to stop in this subject – a condition of the room. It is no secret, that houses of old construction, with bad windows and doors and also with other defects, demand wasting of bigger energy for heating, than usovershenstvuyushchiyesya buildings. From here it is possible to draw a conclusion that it is necessary to begin economy with installation of plastic windows and the warmed doors. Besides, it is necessary to carry out thermal insulation of all structures of the building. It will allow to lower to a heatloss minimum.
The important task is to choose an economical gas copper for the house. For a start it is necessary to calculate the power of a heating system. Let's use the simplified calculation for which it is necessary to know the area of the building and to consider that 1 kW of thermal energy is the share of 10 sq.m. Using the received value, it is necessary to choose a copper, doing a small allowance on power. The collector system when it is possible to regulate temperature in each room is considered the most effective scheme of distributing. The copper has to have function of regulation of temperature, for example, when water in batteries is warmed up to a maximum, the device kind of fills up and gets into gear only out of need.
Councils how to save gas on heating:
- It is important to place correctly furniture in the house that batteries and other heating devices were not forced.
- Between a wall and the battery it is necessary to install the screen from a foil which reflects and keeps heat. It is possible to buy it in any hardware store.
- If it is necessary to air the room, then it is necessary to open windows completely. Choosing the airing mode, it is possible to lose a large amount of warm air.
- Regulate heating temperature, lowering it during the night period of time. Similar manipulations will not allow to freeze, but at the same time it will turn out to save.
It is also worth noticing that economical heating of the house cannot be presented without the correct ventilation as heat can just leave together with the fulfilled air. The best option – a forced-air and exhaust system where it is necessary to place the device – the recuperator. It represents two pipes inserted each other. On a small pipe the room will come out warm air masses, and on the existing gaps to arrive fresh air which will heat up in parallel.
It is possible to use for economy alternative heating, for example, the heat-insulated floor system. This type of heating helps to distribute heat on all volume of the room. Economy is that for hot floors it is necessary to use the heat carrier with the temperature of 65 degrees, and for batteries the value increases and is 95 degrees.
How to save gas in the private house on hot water supply?
For this purpose it is recommended to use the flowing water heater which begins to work only if the person turns on the crane of hot water. If you use a one-planimetric copper, then experts advise in addition to put the boiler or to establish at once a double-circuit gas copper. In that case one torch will be responsible for heating, and another – for water.