Birds feeders can be made of different materials. To make such simple design with own hands absolutely simply. The main thing - in the course of production to achieve that the product turned out accurate and safe for birds. Of course, it is very good if the feeding trough is also some unusual. In this case it will be able to serve including as decoration of the yard. So of what it is possible to make original birds feeders?
Of course, it is possible to make such product and of purchased materials. But usually feeding troughs do nevertheless of make-shifts.
Original birds feeder from a cup
In each house, probably, there are old, not necessary glasses with saucers. Instead of throwing out such ware, it can be used for production of an original beautiful feeding trough. The technology of assembly of "dining table" for birds in this case will look approximately so:
- the bottom of a clean saucer is densely coated with liquid nails;
- spread on glue a cup the handle up;
- wait so far liquid nails will dry;
- cut off three pieces of a cord 60 cm long;
- spin from them a braid;
- tie a braid on the cup handle in the middle.
Further it is necessary just to tie for a braid the made feeding trough to a branch of a tree and to fill grain in a cup.
What to make a birds feeder of: we use a mayonnaise bucket
It is possible to make a beautiful original birds feeder tower of such improvised material easily. For this purpose it is necessary to divide at first a bucket lines into three equal parts. It is possible to make it just by eye. Further in each part of a bucket at distance approximately in 3 cm from a bottom it is necessary to draw doors. That the feeding trough turned out similar to a tower, doors it is the best of all to make figured — with the Oroch above.
Completely doors in a feeding trough tower do not need to be cut out. It is necessary to cut through only a bottom, top and line between "shutters". Further shutters need to be unbent just accurately. To make a feeding trough beautiful, on it it is possible to draw, for example, snowflakes, asterisks and various winter patterns with some paint intended for use on the street.
Feeding trough for lazy
To make a beautiful original birds feeder thus, simply. But this product, of course, has to be also convenient in use. Any feeding trough should be filled with grain, sunflower seeds or bread from time to time. And if hosts suddenly forget to make it, birdies, unfortunately, will remain hungry.
Meanwhile, if desired it is possible to make easily a special bunker feeding trough from which forage will move to birds automatically. It is the simplest to make such product of a plastic bottle and cardboard. Previously it is necessary to make the through sleeve with a diameter about 10 cm of a piece of cardboard.
Further in a bottle it is necessary to cut through from two parties of an opening on diameter of the sleeve at distance in 3-4 cm from a bottom. Then it is necessary to insert the sleeve into openings, previously having cut through in it on length a crack about a centimeter wide. It is necessary to have the sleeve in a bottle so that the crack was directed towards a bottom.
That it was more convenient to birdies to peck a forage, to a bottom of a bottle it is necessary to paste parallel to the sleeve, for example, the Chinese stick (on which they will sit down). Further it will be necessary only to fill sunflower seeds or grain in a bottle and to hang up it a neck up on a branch on a tree. Agree, it is actually original idea of a feeding trough for birds. In process of a forage vyklevyvaniye from a crack, it will be poured down and again to fill a bottle bottom.