To make hardware manicure, it is not obligatory to go to beauty shop, for this purpose it is enough to buy the professional or amateur machine for manicure. But when choosing the machine, pay attention that some models are intended for processing only of the increased nails.
Instruction
1. Professional machines differ from amateur in nozzle turn speed: amateur – 3-10 thousand revolutions per minute, professional – 30-40 thousand. The bath and drying for nails, also in set - standard quantity of nozzles and stick for cuticle is built in amateur machines.
2. It is necessary to hold the machine as the ordinary handle when you write. It is not recommended to press too densely the working nozzle to the processed nail, nozzle it is necessary to hold at an angle 45 degrees, gradually moving it on the processed surface. If you have not completely seized skill of processing – better to work at low speed. Further, speed can be increased. It is necessary, first of all, for your safety and purity of process.
3. Rules of hardware manicure in house conditions: 1. If nails are varnished, remove it with liquid for varnish removal (it is desirable without acetone).2. Special wooden (orange) stick remove cuticle.3. Turn on the machine on average (low) speed and remove the coarsened leather; also process leather around nail.4. To remove callosities, use the sparing nozzles which go complete with the machine.5. Process nail file edge of nail, giving it desirable form.6. Take nozzle in the form of ball and remove cuticle.7. For polish of nail you can use nozzle in the form of bast.8. Having stopped doing hardware manicure, use hand cream or oil, for nails, and from above - fixer and let's nails dry out.