If you have got the seasonal dacha without water supply system, but at neighbors and in general in the settlement the water supply is adjusted, more simply and most quicker to forward so-called "ingate". It is relevant in case something is already put, and your beds press watering.
Letnik
. Decide on the place where on your seasonal dacha the route will lie, and measure distance. Gain the necessary number of meters of rubber or kapron hose in shop and just lay it on earth surface. It is possible to put metal pipes, it is temporary, "quickly", having connected them pieces of hose of the corresponding diameter and having clamped collars. Before the end of summer season "ingate" will perform the function.
Mounting of water supply system from municipal conduit
.
Year-round water supply for giving will demand laying of pipes at depth below freezing mark. On them water from source to houses and other right places on the site will be delivered. As source there can be distributing well of municipal water supply system or the well in own territory equipped with the pump lifting water. Mounting of conduit is made with use of fitting, valves and cranes. These are those parent materials which need to be got. Besides, special purpose tools will be necessary for you for work.
Previously make the drawing and marking on the area, having designated future route by pegs. It will help not to allow excessive cost of acquisition of parent materials.
Welding of plastic pipes
As water plastic pipes use generally pipes from polypropylene. It is convenient to connect them to the help of plastic fitting and weldings. For carrying out operation you will need availability on the site of electricity, the special soldering iron and the cutting torch which many shops willingly give for rent. It is possible to cut pipe also normal hacksaw. Joint turns out airtight, and work does not demand any special skills: it is necessary to follow the enclosed instruction only precisely.
Mounting by means of screwed fittings
Metal pipes gather by means of metal fitting with thread, both external, and internal. On extremities of pipes at the same time also there has to be thread or it is cut independently by means of the die.
For pipes from ferrous metal it is justified and quite we accept mounting by means of arc welding. Welding of galvanized pipes, in order to avoid poisoning with zinc vapors, is admissible only in the open air.
For work you need gas pipe wrench No. 20. At pipe joint it is necessary to adhere to the sequence in the direction of water and to use sealing material.