To build on own site gazebo with barbecue – difficult operation. Before its construction it is necessary to be prepared – to study literature, by all means to make the plan of works. The design has to correspond to construction and fire-prevention standards.
When scheduling for construction of gazebo with barbecue it is necessary to consider land relief, to find out the nature of soil. In advance the arrangement of construction on the site has to be defined, the issue of leading of utilities to it is resolved.
What to provide at construction implementation
As in gazebo will be located to bake, at construction of construction it is necessary to pay attention to the following rules. Height of the base for the furnace should be provided such that the level of standing of water during spring thawing would be lower. The same and concerning rain waters. The furnace laying can suffer from contact with water therefore the gazebo should be protected carefully and from seasonal rains.
The size of gazebo should be chosen so that around the furnace remained rather free space – for maintenance of fire safety. From that party where there is furnace fire chamber for barbecue, the free space has to be not less than three meters, for other parts the meter suffices. Determine the size of the furnace depending on those functions which it should carry out. What it will be more, its wear will be that rather also – it should be considered. The gazebo with barbecue should be placed at safe distance from bushes, trees, the gas pipeline and other lines of communication. It is necessary to calculate so distance that smoke from the working furnace did not go to the house and that the gazebo at the same time was not from it at a great distance.
How to choose material and to construct gazebo
For construction of gazebo with barbecue it is necessary to select materials, first of all, taking into account fire safety. Choose metal elements from cast iron. It is better not to use normal steel: on it scale and other noxious to health substances are formed. For vykladyvaniye of furnace part and flue stock up with red oven brick. It is ideal when the gazebo with barbecue is carried out brick or stone, in half-open option. It is necessary for airing and air exchange. Paul gives all the best fire-resistant tile or is made of other non-combustible materials. Surely there has to be bias for water drain. If you are going to construct gazebo after all of wooden material, it is in the fresh air better to apply folding brazier which can be collected quickly before use to cooking. To manufacture the most elementary model of the furnace of barbecue, it is necessary to arrange concrete foundation from refractory brick. Mix of clay and sand at the rate of 1:3 will be suitable for binding masonry mortar. Optimum height of the furnace for barbecue – about a meter. At laying between parallel sides of the furnace arrange two grids from metal – distance between them 20-25 cm. On the top grid it will be possible to cook food, on lower the fuel burning process is carried out. Over grids arrange cone-shaped flue. The design of barbecue differs from grill in the fact that it has back wall. It will work as the insulator of furnace part. So the heat from coals can be used more rationally.