Buying extract for gas-fire, you at least have to possess data on its dimensions. In general it should be noted that acquisition of kitchen extract rather responsible process which requires from the buyer at most attention.
It is required to you
- Tape measure.
Instruction
1. Before you appear in shop and start the choice of extract, you need to remove measurements from the gas-fire established in your kitchen. If the gas-fire also is at acquisition stage, decide at first on it then, also execute its measurement. In particular you have to are interested in width and depth of working surface of plate. With these measurements you can go to shop.
2. As the extract attractively would not look, you will not be able to buy it for one simple reason which is even not for lack of money – its sizes will be improper. That is, if the sizes of the extract which was pleasant to you correspond to dimensions of working surface of gas-fire, it cannot be bought unambiguously. Why? Because the sizes of extract have to exceed dimensions of kitchen stove on ten centimeters from each party. If its area is the smaller size, ventilation will be low-quality. Thereof – the spoiled facing of complete kitchen, unpleasant traces of fat on ceiling. After you buy extract with the necessary dimensions, you can start its installation.
3. One more important rule – the dome of extract has to be recorded at distance of 60-70 centimeters from working surface of plate. This height is ideal for optimum work of ventilation. If you arrange extract below, – hot couples will melt plastic constructive parts over time. If the provision of extract is higher than 70 centimeters over plate – couples will damage facing of complete kitchen. Fixing of design is carried out by means of fixing parts which are delivered complete with extract.