If you were puzzled with laying of electric cable, then pay attention to so-called "soft" wire. It is easy to bend and adapt it for specific features of the room.
Instruction
1. The soft wire consists of set of thin conductors. At connection they need to be pressed out well. The terminations of thin wires can rather just be turned into monolith. For this purpose it is necessary to napressovat special tip. Thin conductings can even be soldered among themselves. Anyway you should carry out additional operation.
2. Now there are products which are calculated on correct fixing and reliable clip of soft wires. In this situation you should be engaged in the choice of sockets and switches. They have to have suitable connectors.
3. You can get monovein. Each conductor will consist of the only vein. Consider, this wire bends much worse. For this reason it is called "rigid". Extremely it is not recommended to use it on sites where frequent bends are possible. The rigid wire perfectly is suitable for connection of electrical household appliances. It carries current not worse than "soft". However at "soft" wire the surface area is more. All this thanks to set of thin conductors which are its part. Through it it is possible to pass big current. The monovein not always copes with this task. Consider, the more current, the heating is higher. Problems can arise only with isolation which seldom maintains high temperatures.
4. For the household purposes you can use both "soft", and "rigid" wires. Wiring surely has to correspond to loading which it has to sustain. If you need to power the household electric appliance or the tool from current network, then you can use PVS wire also. It comprises copper veins. The wire has isolating PVC and general cover. It is made of polyvinylchloride plastic. Such wire serves on average 10 years.