The steel shutter is not just means for protection of the apartment, but also certain esthetic beauty and practicality. Modern producers offer almost boundless choice of doors for every taste and the size of door opening.
It is necessary to tell that today and domestic manufacturers provide the quality goods which are not conceding in characteristics import which many times exceed the cost of our doors. Though after all sometimes you should not save, and carefully to trace quality of door, and it is even better to check process of its production completely. To choose steel shutter it is necessary to know distinctions of models. Usually material of which doors individually for you are made differs in higher quality, and here it is possible to check completely process of production of door and to pick up everything necessary material and accessories. And standard doors are designed most often for the mass consumer. Here the defects connected with conveyor production and scale of the project are very often observed.
Let's notice that most often import models of doors are tied to standard measurements, and the domestic manufacturer is guided by "non-standard" orders which, by the way, are more expensive and are carried out longer.
To choose steel shutter it is necessary to study the most practical system of the device of door. So, import doors at the heart of the have steel framework with internal stiffening fin. Sheets of steel are attached to this framework on both sides and the door is located in certain steel box which the master will install for you in door opening. Inside there is sound-proof and thermal insulation material, but it is possible to find door and without "interiors". Remember that import doors, besides because of difference in the used material, are much thinner domestic (thickness of such door should not exceed 1.5 millimeters). The doors made by domestic manufacturers have thickness from two millimeters, but it does not indicate their best characteristics as usually compensate by thickness poor quality of door and steel which was applied to its production. Surely consult about the maximum weight which the loops going complete with doors will be able to sustain. The loops based on the support bearing are recognized as the most reliable. The quantity of necessary loops for you will be counted by manufacturing firm. With special care it is necessary to pick up the lock and various door accessories (peephole, internal latch and so on). Experts recommend to choose import locks which are least subject to breakage and have up to four billion combinations. The peephole surely has to have the big radius of viewing, and for bigger safety it is possible to use specialized monitoring systems. The cost of door will be calculated by means of the following indicators: size, quantity and quality of locks, total cost of accessories and external covering of door. To all other surely use professional services of installation of door, even the most reliable door will not be able to protect you at misplacement and economy on accessories of fastening of door.