How to clean the iron from scum

How to clean the iron from scum

Sooner or later before the hostess there is question of how to clean the iron from scum. Even the most expensive iron becomes soiled not only outside over time, but also inside. The scum can lead to breakage of the electric device therefore it is so important to remove it in time.

Scaling reasons

The scum is firm deposits which are formed on working surface of the electrical household appliance when heating of water in it. The intensity of scaling in many respects depends on water quality. At hard water there are compounds of calcium and magnesium. When heating such water there is chemical process in which result salt break up to carbon dioxide and insoluble deposit.

Over time the scum can fill canals in iron sole on which steam arrives. Most often problems long remain unnoticed. If you have noticed that steam does not come out or from opening on sole of the iron dirty water flows, then it is time to think of how to clean the iron from scum.

Household ways of cleaning of the iron

In order that the iron long and regularly worked, it is the best of all to fill in the distilled water in the tank. If the scum after all was formed, and the iron has no self-cleaning function, then it is possible to use popular ways of cleaning of the iron in house conditions.

Cleaning of the iron by means of mineral water. 

Carbonated mineral water needs to be filled in in the tank, to turn on the iron in network and to heat it to maximum temperature. Then over basin or other big capacity it is necessary to exhaust until together with steam completely there is no all scum. When the tank is completely cleaned, it is necessary to wash it with clear water, and then to wipe iron sole soft rag or terry towel.

Cleaning of the iron by means of citric acid.

Citric acid perfectly copes with scum practically on any household appliances. In glass of water it is necessary to part one bag of citric acid, and then to fill in the turned-out solution in the iron tank. After that it is necessary to heat the iron to maximum temperature. Further, algorithm of cleaning just the same, as when using mineral water.

Scaling prevention

To prevent emergence of scum, it is necessary to remember several simple rules. First of all, before stroking it is necessary to study attentively labels on product and to strictly observe temperature condition. Also it is necessary to remember that in the iron it is the best of all to fill in previously purified water, and after completion of work always completely to drain water from the tank.

Author: «MirrorInfo» Dream Team


Print