How to make camouflage network

How to make camouflage network

Fans of hunting know the basic rule of this responsible action – patience and masking. What, to hunters not to occupy patience and how to be with masking? It is not important at all whether beginners you are hunters or already skilled. Anyway, the camouflage network to be necessary in favourite business. And made with own hands, it, besides indispensability in hunting, will be subject of your pride!

It is required to you

  • - grid on basis;
  • - flax, branches, moss, grass, rags, tow, basts;
  • - paints and brush.

Instruction

1. In creation of camouflage network there is one indisputable advantage – anybody will have no such grid, and the most important, she will meet all your requirements. For a start buy basis. Almost any grid of any target orientation will be suitable for it. It can be normal rope or fishing net from nylon thread, but do not take fishing line as basis at all - with it nothing will turn out. So, the invoice was chosen, now we will pass to metric area.

2. Take enough material of the chosen basis. To make camouflage grid properly, the space is necessary. Therefore safely take four running meters (more or less – depends only on your build) and begin to do the most responsible and creative part.

3. Interweave camouflage parts into preparation. The knowing people use flax, natural masking (branches, moss, grass), rags, tow, to bast and other. You needed to choose that there is more to soul.

4. You have carried out preliminary work, have stocked up with patience, begin to interweave masking into network. Do it in that order in what it is more more convenient to you. However you will not be prevented by council: try to tie each brush not in the middle, and it is asymmetric that one of the ends was much longer than another, but not to the point of absurdity, of course. Advantage of this fastening is the best visibility of surrounding space through ready camouflage network.

5. Preparation length for brush make 20 cm of Vvyazyvayte tape in each free square, doing not pass any section. If you have chosen branches for your self-made camouflage network, select only the thinnest. Thick branches will is unprofitable to puff up and will not create effect of uniform cloth. Other materials are lighter in work because they have soft texture.

6. To decide on amount of the interwoven material, you remember - the camouflage network should not look as sphere. Therefore for each brush take small amount of material. For small grid width of brush has to be thickness about little finger, for large - two middle fingers. Vvyazyvayte also fix brush model strong not to lose fruits of your work on the road.

7. On completion phase of creation of masking take paints, it is better resistant which are suitable for deep coloring of fabric. By means of brush paint the creation in typical colors: green, gray, brown. The camouflage network is ready. It is necessary to update quickly!

Author: «MirrorInfo» Dream Team


Print