In the summer picnics outdoors enjoy wide popularity at citizens. But to leave on the nature is one business, and to here hold picnic in comfortable situation – completely different. To ensure comfort, it is possible to get both tent, and marching table, and chairs to it, and it is possible and to collect all this independently.
Stationary tables
If you have favourite place on the bank of reservoir and you leave to it regularly, then it makes sense to make stationary wooden table with benches. For this purpose it is required to saw trees with a diameter of 35-45 mm and 20-25 mm of 1.5 meters.
Saw thirty-five-centimetric log on 4 equal chocks no more than 65 cm high. It will be 4 legs of the basis for two benches. Cut 2 more chocks 110-120 cm high they will form the basis for table. Then on them across fill 2 executioner's blocks such are long what width you want to see the table. On executioner's blocks attach in turn trunks of trees with a diameter of 20-25 mm so that at you have turned out table-top, similarly fill trunks for seats of benches. It is possible to leave shops timbered, and here it is desirable to lay table dense cardboard or to beat to table-top leaf laminated by chipboard.
Mobile table
Take wooden bar of 25х25 mm in size and make the table basis of it so that it could develop. Usually cut two rails high to polutorametr which are fastened cross-wise so that the design moved, developing and revealing as if scissors. For the ends of bars fill rubber pads. they will help to establish table so that it did not slide and also will hold removable table-top. As table-top use the pressed plywood. If the table has the big area, it is better to saw plywood on 2 parts which to fasten among themselves by means of loops.
Welded designs
The welded design of marching table is much more reliable than wooden analog, but here only weight will be 10 times more. This design by analogy with wooden is made, only instead of bars the metal corner which connects by means of welding is used. The table-top can be made of narrow-purpose aluminum, for this purpose use the acquired or self-bent identical aluminum beams up to 10 cm wide fastened with furniture loops. The table-top has to be on 20 cm to length and support are 10 cm wider. Such table-top in assembled form is similar to narrow metal briquette, it is convenient to store it in tarpaulin bag. The table-top can be and wooden or from fibreboard, by the way, wooden bars can be fastened not with loops, and by means of dense fishing line or nylon thread as if stringing. Pay attention that in that case between executioner's blocks there has to be distance of 0.8 cm, otherwise the design will not gather. Stools can be made also of metal corner, having fitted them tarpaulin.