The drawing is one of furniture fabrication stages without which it is impossible to do. Competently made drawing containing in itself all parts with sizes will help to count amount of material and accessories for production of sliding wardrobe. Also it will be good help in the course of assembly.
It is required to you
- - Paper;
- - pencil;
- - ruler;
- - tape measure.
Instruction
1. Decide on type of sliding wardrobe which drawing you are going to execute. Choose cabinet design (built-in / angular / case).
2. At implementation of the drawing of the built-in sliding wardrobe, at first make measurements. Measure height in three places: on the right wall, on the center and for the left wall. Choose the smallest of these three values. It will also be height of your cabinet.
3. In this way measure width. From wall to wall: on floor, ceiling and the middle. The most smaller of three result will be width.
4. Measure depth of aperture in which you are going to mount cabinet (niche, corner, etc.). Pay attention, to width of guides for doors which will be used. On average they occupy 100 mm from the general depth of sliding wardrobe.
5. Having taken the measurements, start implementation of the drawing. Take the sheet of paper, pencil and ruler. Draw overall view of cabinet. Specify its sizes (width/depth/height). In order that it is correct to show all sizes of sliding wardrobe, execute the drawing in projection ¾.
6. On the following sheet make the drawing of your sliding wardrobe without doors, having specified on it all regiments, vertical partitions (walls) and other elements of cabinet. Here note distance between regiments.
7. Trace all parts of cabinet separately. Regiments, walls, doors, hoods, etc. - all from what will consist your cabinet. Designate the sizes of each part, its length and width. If in production of cabinet materials of different thickness are used, specify it in the drawing.
8. Mark those parties of parts which have to be pasted over with edge. Apply marking of openings on all parts (which need it). Designate location of openings on part (distance from each edge of preparation to the center of opening), their diameter and quantity.
9. Include the full list of the accessories necessary for assembly of sliding wardrobe in the drawing: the name, quantity, the size (if it is necessary). Give the ready drawing to work.