Tanks of toilet bowls are folding products. It is not obligatory to change them entirely if it is necessary to replace only one knot. At some tanks it is uncovered at once, at others before it it is necessary to disconnect fixing parts.
Instruction
1. Close cabinet door with valves (in the presence of that) that it did not prevent to sort tank.
2. If the handle-bar is located draining from tank side, and on cover any additional buttons or levers are absent, just raise the last, and then remove.
3. In case the design of tank provides water drain by pulling of the draft passing through cover up turn off the ball located on the end of this draft then it will be possible to uncover in the way stated above.
4. The tanks operated not by levers or drafts, but buttons are least convenient for dismantling. But, as they give additional opportunities (for example, draining at choice of either three, or six liters of water), such designs gain ground. To remove cover on which the button is located in the beginning turn out the tube located around the button (or two semicircular buttons). Outside it looks as ring. If instead of two buttons there is one, capable to shake in both parties, in the beginning pull out it.
5. But even after that it will not be possible to uncover - it will only be possible to shift slightly it up. But also it is quite enough for its turn so that it was located across the tank body. Having arranged cover thus, unfasten latches of push-button knot, and then uncover together with it.
6. Remove cover that it did not prevent opening of door of cabinet with valves. Put it in such place where it will not be broken. Before replacement of float or the valve operated by this float surely open this door, block cold water, and then again close. Otherwise flooding because of overflow of tank is possible.
7. Having repaired tank, several times check it in work without cover. Make sure that when raising float the valve every time is with guarantee closed. Only after it collect everything upside-down. Trace that all parts have been combined with each other as well as before dismantling. For example, the draft surely has to pass through opening in cover.