With approach of New Year's holidays it is worth thinking once again of where and as there will be the main heroine of the occasion – New Year tree that and did not take a lot of place, and fitted into house interior, and beautifully looked.
- Wooden blanks, hammer, drill, wood saw, self-tapping screws, nails, rope.
1. With installation of artificial fir-tree of problems usually does not arise. The crosspiece surely is included in its package, and installation is carried out on the enclosed instruction. Slightly more difficult the situation with natural fir-tree or pine is. Perhaps, the most known support for New Year's tree – the crosspiece, the design consisting of two crosswisely brought down wooden bars identical are long. The hammer, drill, wood saw, self-tapping screws, nails and rope will be necessary for you for its production, besides wooden blanks.
2. After you hammer together the crosspiece, in the center make opening and insert into it the inserts prepared in advance which will become the slot for fir-tree.
3. Fix inserts in opening by nails or self-tapping screws. It is desirable that the slot corresponded to diameter komlya. If the butt has appeared slightly less than the size of the slot, record fir-tree trunk wooden wedge.
4. The fir-tree basis made of the lower part of office chair is represented more modern and original. There can be two options – to use for this purpose the old, served the term chair or to offer new for the period of New Year's holidays, having removed from it upper part. You will need only to adjust butt in chair rack opening. Such design is very mobile, but if you have decorated it with electric daisies, then it is better to record wheels on floor.
5. Who has told that the fir-tree has to stand by all means? It turns out that for the forest beauty also the suspended option is provided. For its implementation you will need load-carrying structure in the form of pipe, sticks and even mops. The most important that there was enough its length for fixing of fir-tree in hover. The design represents the crossbeam resting against plinth at an angle 400, the upper part of which fastens rope to wall by means of hook. It is necessary to tie to the top end of crossbeam fir-tree the rope covering trunk is slightly higher than centroid.