The stroke proofreader is intended for correction of mistakes in any documents and written works. Can have water, spirit or emulsion structure and also is on sale in the form of tapes on the basis of solvent and adjusts necessary records in the dry way. Spots from any stroke proofreader cannot be removed normal washing therefore at first they should be processed.
It is required to you
- - means for removal stroke proofreader;
- - the stain remover intended for removal of greasy spots;
- - means for washing of ware;
- - gasoline;
- - kerosene;
- - white spirit;
- - solvent 646;
- - acetone;
- - laundry detergent;
- - laundry soap;
- - Antipyatin soap;
- - alcohol-containing liquids;
- - sponge;
- - cotton pad.
Instruction
1. Delete any stroke proofreader from fabric with the special solvent intended for removal of spots from the proofreader. You can buy it in any department of office supplies. It is the most rational to get it together with the adjusting structure as even during the accuratest work there is always probability to be soiled.
2. If you have not bought special means, then delete pollution from water-based stroke by means of soap under trade name of Antipyatin or by means of normal laundry soap. For this purpose moisten places of pollution, soap the specified means, leave for 30 minutes, wash product in the normal way.
3. To remove stroke on emulsion basis use the means capable to remove greasy spots. For this purpose the stain remover intended for removal of greasy spots, means for washing of ware, gasoline of high cleaning, white spirit, acetone, kerosene, solvent 646 will approach. For use of stain remover for removal of greasy spots apply it on pollution, leave for time specified in the instruction wash product. To remove spot by means of any dissolving means, wipe spot with one of the specified solvents, leave for 15 minutes, wash product.
4. Delete spirit stroke proofreader by means of any liquids on the basis of alcohol. For this purpose medical, technical alcohol, vodka, cologne, tonic or, as a last resort, toilet water will approach. For use it is abundant moisten the place of pollution, wipe with sponge, wash product.
5. For removal dry stroke proofreader dissolve handful of laundry detergent in warm water, wet thing for 1 hour, wring out, shoot the film and wash fabric in the normal method which you use always for fabrics of this type.
6. If you have spilled the proofreader on the basis of solvent, delete it with the same method, as well as the proofreader on emulsion basis, that is use any solvents, but do not forget that no kinds of solvents can be used on silk fabric, velvet, acetate and other materials which can be dissolved together with spot or burn out. Therefore before use of any means make sure on the imperceptible site that you do not damage fabric.