Today already nobody considers the use of the clean butylated potable water saturated with mineral complex and other useful substances the next whim. It is especially convenient to use the coolers intended both for cooling, and for water heating. But, as well as any other equipment, it is necessary to repair them over time.
It is required to you
- - napkin;
- - cleaning agent;
- - clean scouring sponge;
- - electric device;
- - screw-driver;
- - safety lock;
- - large bottle.
Instruction
1. Malfunctions in work of cooler for water can be often caused by gross contamination of the device. So purge cooler. For a start switch-off the device from the socket and remove large bottle from cooler.
2. Accurately and very carefully wash out surface by means of means for washing of ware. Pay special attention to the site around needle (place where the large bottle with water is put on).
3. Carefully remove pallet and properly wash out it, having rinsed then under flowing water.
4. Dry wipe all elements of cooler with clean dry napkin.
5. Then insert pallet into place, establish large bottle and grind off several glasses of water (it you propolosnt the crane thanks to what prevent hit of cleaning agent in water).
6. Include cooler in network and wait for cooling and heating of water. Carrying out similar cleaning helps to avoid hit of dirty parts in the cooler mechanism, so, prolongs its work.
7. If the cooler has ceased to heat water, check first of all and whether it is included in the socket and whether the include button is pressed on the device panel. If after turning on of the device the bulb indicator nevertheless does not light up, make sure of operability of the socket. For this purpose turn on in it any other device. In case the reason in the socket, move cooler for water to other place where row has located the serviceable socket.
8. If the reason nevertheless is in cooler, then by means of the screw-driver turn off the back panel of cooler, remove the safety lock and if it has burned down, change it for new. If after the taken actions the device still does not work, perhaps, the heating coil has failed — the cooler needs to be carried to the service center.
9. If in cooler water leaks, the reason of it, as a rule, is in the cracked plastic large bottle — replace it new.