It is recommended to apply lining to finishing of felling. This material represents eaves board which thickness about 20 mm. You can independently sheathe the house lining.
Instruction
1. Before work, lining should be put in the room. In it she has to rest in bed about day. The tree during this time will be able to get used to microclimate. Then it is possible to start preparation of wall already.
2. If wall ideally equal, then lining it is possible to fix directly to it. In this case the technology of mounting has to be surely observed. You can fix material screws or large timber dogs. If on wall there are roughnesses, then be engaged at first in its preparation.
3. The grid will help to get rid of roughnesses of wall to you. Choose the direction in which lining mounting will be made. Then start creation of grid. On it then it will be possible to fix finishing material. Fix extreme bars. Use if necessary the level and plumb. That the grid was equal, it is recommended to fix bars at distance of 50 cm. In space which remained between wall and grid you can lay heater. Use mineral wool.
4. To create waterproofing it is necessary to fix over mineral wool and grid parobaryer. Fix him the stapler. Hydrozashchitka film is capable to protect from moisture and to prevent rotting process. Stack it the correct party. This film has on the one hand smooth surface, and with another – rough. Stack the smooth party to heater. The rough party has to be directed to lining.
5. Cut lining of necessary length. In this case everything depends on floor-to-ceiling height. You fix its brackets. Also well finishing nails are suitable for fastening. In connection corners of the room cut lining on width. After installation varnish material or mordant. You can pick up varnish for color. Also in shop it is possible to buy lining which does not need further processing by varnish.