For inhabitants of owner-occupied dwellings and cottages the best and economical view of heating is gas. Installation of the gas equipment is strictly regulated and does not allow any amateur performance. To warm with gas the house, it is necessary to perform the following operations.
It is required to you
- - gas boiler;
- - pipes and batteries;
- - permission to installation.
Instruction
1. Submit the application to the gas municipal government. Consider that if you live in multifamily house, can refuse to you as the loading created by gas boiler on strut is limited, and autonomous heating can be established only in every tenth apartment.
2. Address to the company which will help you to make the project of gas communications (the address or phone can be learned in mountains - or district gas). Make sure that everything is located on that place where it was planned, and your wishes are considered, for example, you can order heating of water in the pool or "Heat-insulated floor". Besides, you remember, powerful boilers (more than 60 kW) require allocation of the certain room with entrance.
3. Agree on the project with gas management and order installation of the counter. Undergo instructing and receive instruction about that, to properly use the gas equipment. Besides, to get permission to installation of gas boiler, it will be necessary to carry out inspection of technical condition of ventilating duct.
4. Choose boiler, proceeding from the heated area and material of which the house is built. If in your house there is no water supply system with hot water, buy the double-circuit boiler allowing to heat water for constant use. Check whether the certificate of conformity is attached to boiler; besides, have to sign the contract for maintenance with you and issue the warranty card.
5. Lay communications, that is pipes and electric heaters. If you have necessary skills and knowledge in this area, can perform these works.
6. Only experts can be engaged in installation, control and start of the boiler equipment, but you can control this process. At installation of wall boiler make sure that it is reliably fixed on wall and any possibility of accidental break is excluded. It is necessary to connect boiler in such order: at first installation is made to the system of smoke removal and the gas pipeline. After that the services of heating and hot-water supply is connected. For reliability check all seams and joints independently by means of simple soaping of pipe surface (if bubbles are inflated, means there is gas leak).