When it is necessary to design and build network between two laptops (or netbooks), it is better to do without use of network cables that steadily threatens with reduction in the rate of data transmission. However in this case mobile computers remain mobile. Wires do not disturb because they are absent simply.
Instruction
1. The most part of wireless adapters of netbooks and laptops does not support the Soft+AP function (actually creation of wireless access point). Nevertheless, two mobile computers can be integrated in a local area network as it is possible to supply with Internet access both devices also.
2. Turn on one of laptops if you did not make it yet, on its net board connect a cable of connection with a wide area network to the connector.
3. Make some settings of this connection. Pay the attention to requirements and recommendations of your provider. Then check, whether all with connection as it should be.
4. Further it is necessary to configure actually network between mobile devices. Open first of all control center of networks and also the general access. Then click a menu item "Control of wireless adapters". Find a button on the main toolbar "Add", click it.
5. Further you should are interested in the subparagraph "Create network the computer computer". Click it with the left mouse button, then the window will open, a gley it will be necessary to press Next. Set SSID of your network, select safety type from the offered options. Then enter a necessary for receiving key to your access network. Try to think up as much as possible difficult, but at the same time easily remembered personally by you key.
6. Opposite to point under the name "Save Parameters of This Network" check, click on "Further" then the window will appear. There it will be told that the network is already ready to use.
7. Now you need the second laptop. Include on it search of wireless connections. Select the network created by you recently and press the Connection button, then enter a key of access to network in a new window.
8. Now on the same laptop open settings of the wireless adapter. You need to select properties of TCP/IPv4 protocol and to set the following parameters for the appeared menu:
- 135.135.135.2 – the IP address;
- The subnet mask – is selected by a system automatically;
- 135.135.135.1 – the main gateway;
- 135.135.135.1 – DNS servers.
9. On the first computer open the same point that it was specified in a step 8. Here it is necessary to fill only one field – the IP addresses field: 135.135.135.1.
10. It was necessary to open Internet access for the second computer in network. For this purpose on the first mobile device open a properties window of connection to the Internet then select a tab under the name "Access". Then include point which is responsible for providing the general access to a wide area network. Here specify the network created by you and save settings.