Siding - rather new finishing material. Its different types are used in and outside of the room. It is easy to work with it, mounting goes quickly, and the result is visible at once. The house sheathed by siding takes accurate well-groomed form and additional thermal insulation will never prevent.
It is required to you
- - vinyl siding;
- - metal rails;
- - cord;
- - level;
- - self-tapping screws.
Instruction
1. The vinyl siding best of all will be suitable for finishing of the house, such material is qualitative and inexpensive. Pay attention to the drawing, the invoice and coloring, they have to be in harmony with other style of the house and yard. The siding does not need to be tinted, it is enough to wash from hose from time to time. As a result of such facing you will be able to warm the house.
2. At first you need suit furring. It can consist of wooden bar or of metal section. Tree in this case - the most expensive and not the best option. For metal furring take galvanized steel.
3. As fixture use dowel for fast mounting, they are applied just to brick houses. Create marking on wall by means of painting or tracer cord. Instead of it you can take construction plumb. In the lower and upper part of wall through everyone half-meter make risks, connect them among themselves cord. For this work you need the assistant.
4. For establishment of fixture and definition of vertical of mounting of grid be guided by the line of cord. Begin to install fixture with angle section, bring him most close to the region of the building. From opposite corners on one and a half meters stretch thread. It will become mark for vykladyvaniye of other profiles.
5. For mounting of siding prepare the laser or water level correctly to establish drain level and to define the horizon. Lace beat out horizontal line on which you will fasten then drain level. It fastens self-tapping screws or press washers. Only do not twist them up to the end, place on the center of assembly groove that the level could be moved.
6. That the top grooves of connecting levels have not slipped, fix them above. Other spare parts are fastened in the middle of groove. Now you can install siding panels. Do not attach them closely to each other as on heat they extend. As far as strips will extend it has to be specified on packing.