Reinforced film is three-layer construction material which is made of special elements, such as svetostabilizirovanny film, high-pressure polyethylene and armoring lattice. The cost of such film is quite high today and if it is necessary to get it in large number, then, of course, it very will cost pretty penny to any summer resident. There is a solution, you can reinforce it independently.
It is required to you
- - film;
- - grid;
- - glue.
1. Get special construction armoring lattice and normal polyethylene film of the size necessary to you in shop. The polyethylene film needs to be cut on two equal pieces. In case you do, for example, the greenhouse, it is possible to cut initially material according to assignment. At the same time know that each piece of film (on door, on walls, on roof, etc.) has to be taken in double copy.
2. Spread out pieces of film on two according to the sizes. Spread one of them even layer. Take construction armoring lattice and miss the mark it with special glue. You remember, it is the best of all to use glue high-speed and quickly drying. At the same time it is important that it had no specific smell.
3. Paste armoring lattice on film. Spread with glue the second layer of grid and fix on it the second piece of polyethylene film. Fasten the received design at the edges and in several places (depending on the size) with special timber dogs. Reinforced film is ready, it can be used safely according to purpose, and in cost it will manage much below than ready material.
4. Such film made with own hands, the way stated above will serve to the summer resident more than 5 years. It can be used repeatedly on the open spaces in farm. Presence of armored lattice in film allows to increase material life cycle many times as this grid does not allow to be torn under the influence of natural or mechanical factors to polyethylene.