By means of normal paint it is possible to give to design of old table or chair uniqueness, unique style. When choosing paint or varnish it is necessary to consider material of product, the requirement to operation and also the general state.
- - paint;
- - primer;
- - putty;
- - abrasive paper;
- - brushes, rollers or spray;
- - protective equipment.
1. For wooden furniture it is better to choose traditional enamel varnish paints, they add to product gloss. The opaque surface can be received by means of oil paint.
2. To keep natural beauty of tree and at the same time transparent structures — glazes, impregnations and transparent lacquers will help to protect product from external influences. They contain the substances serving as the ultra-violet filter, protect wood from fading and darkening. Besides, advantage of impregnation — it can be painted new furniture from damp wood as it differs in good vapor permeability.
3. Also acrylic paints differ in the breathing properties, choose them for new wooden furniture. These are frost-resistant, durable, waterproof structures which approach as just for decoration in the house, and garden benches. It is very convenient to paint figured furniture from barrels with the spray. If the special shade is necessary, part one or several kolorator in white paint.
4. To give to chairs or dresser ancient look, use the nitrolacquer or nitroenamel. It is important to process correctly surface before coloring, to carefully clean off all remains of the previous covering and to ground.
5. If at survey of wooden surfaces in the house you have faced the small courses of bugs wood borers or mold, surely process furniture antiseptic solutions. In several days it will be possible to put layer of decorative paint.
6. For coloring of furniture choose alkyd, oil or acrylic paints from chipboard. Previously well clean and degrease surface, then ground (the laminated chipboard it is necessary to ground in several layers). If there are minor defects and scratches, it is possible to put putty layer before coloring.
7. When coloring metal furniture make sure what metal has been used at production. Paint the forged products from low-carbon steel with anticorrosive structures, previously having cleaned from rust. For profile furniture from aluminum special enamels with high adhesion to this metal are produced.
8. It is possible to paint plastic furniture by means of acrylic water-based paints, but not all types of plastic give in to coloring. Pretreatment is obligatory: primer and oshkurivaniye. It is important to observe the mode, optimum indoor temperature has to be 18 wasps, about 80% of humidity, all components are equally heated-up.