After fishing from the normal rubber boat becomes not such fascinating, many fishermen think of acquisition of the boat motor. Availability of the motor allows to get the real trophies from big depths. The boat with the motor is simply necessary for successful fishing.
It is required to you
- The boat with tranets under the motor
- Shops
Instruction
1. Before choosing the motor, it is necessary to study carefully characteristics boats for which installation of the motor is planned. Power of the acquired motor can be determined by one factor: availability of possibility of gliding. If the boat can glide (that is to move at great speed so that over water surface the bottom of the boat rises), then the motor should be chosen big power. If the boat has no redim of gliding, then it does not make sense to install the powerful motor. Also, if at the boat the installation of the motor is initially provided, in the passport the recommended power of the installed motor is usually specified.
2. Now it is necessary to be defined in the clock frequency of motors. Two-stroke engines easy on weight, are most widespread and are most often used. Four-stroke it is heavier, but also functions can carry out more. Such motor has the increased profitability, works much more quietly, than duple, and vibrates during the work less. This factor is very important when fishing.
3. After that it is necessary to choose length of ""leg"" of the screw, so call parts of the engine (pipe, the fairing of reducer and the speaker from it wave of propeller). Length has to be optimum for optimum deepening of propeller and exhaust outlet of exhaust. What the screw will be deeper, the engine works with that more effectively, but the danger of damage of the screw about bank appears. To the contrary, than the screw is higher, its mozhnost will be that less. Also the legs size depends on height of tranets. For inflatable boats or boats with tranets it is possible to take motors with short or normal ""leg"" (designation S). If you have large boat, the boat or the small yacht, it is possible to install the motor with ""leg"" of the increased size, markings of L.
4. It was necessary only to write out all required characteristics for your motor and to come to shop behind the most suitable motor for your boat. Pleasant acquisition!