Before carrying out construction jobs on the site it is necessary to define its borders in the beginning and to clear away it, having dumped unnecessary trees, having removed bush and stubs. To dump tree, however, it is necessary to have certain knowledge and skills. If you approach to roll of trees responsibly, then will be able to save yourself from possible injuries and excessive efforts.
It is required to you
- Saw, axe, rope, rope, scrap
Instruction
1. It is necessary to remove from the site trees prior to construction jobs. To dump tree with trunk thickness more than 30 cm, it makes sense to invite the professional woodcutter. It is necessary to know that it is necessary to fell tree in certain direction, having cut or having filed it at first from that party where it has to fall, and then – from the opposite side.
2. Several ways of box of trees are known: straight line, simplified, mustache, two rows. The direct box is simple and rather safe. Box depth at the same time has to equal quarters of diameter of tree, and the distance between the planes of box has to equal about 0.7 diameters of trunk. Having cut tree, it is cut. The plane of cutting has to be perpendicular tree axes.
3. At trees which are strongly inclined make box mustache from tree inclination. Box depth at the same time has to equal thirds of diameter of trunk.
4. The situation when the plottage or buildings which are on it do not allow to dump tree completely is possible. In this case it is cut in parts.
5. At roll of trees at distance of 30 m from tree there should not be strangers. It is forbidden to leave tree cut and not dopilenny up to the end. Do not fell trees during thunderstorm or strong wind. If in close proximity to tree the power line or communications is located, then independently it is not recommended to fell tree.
6. Having dumped tree, it is cleaned from boughs. It is recommended to begin the cabin with komlya. Boughs are put to the certain place, they can be useful for economic needs.
7. The stubs which have remained after trees are dumped are dug round, and roots at the same time gradually chop. Then by means of the short scrow-bar or metal pipe stubs need to be pulled out and overturned. Stubs, very big by the size, should be rooted out by means of the tractor. One more way to get rid of stubs – to burn out them. But this procedure is not recommended to be performed to the fan.