It is possible to solve waterproofing problem by means of modern materials. The getting waterproofing is considered today the most demanded as the quality of the carried-out works conforms to all Russian and international standards.
Pluses of the getting waterproofing
Unlike rolled materials the getting waterproofing does not peel off, is not subject to emergence of dampness, mold and fungus. During mounting the extra time is not spent for direct fixing of material as to put the getting waterproofing simply and quickly. Besides structure price rather available. All this is confirmed by responses of consumers at construction forums.
The dry structure is just mixed with certain proportions of water, carefully mixed and put by means of the roller, brush or compressor air spray pistol. All time of concrete is filled, chemical reagents react with cement, forming insoluble crystals. Water from within the isolated material is pushed out, small microcracks are reliably corked.
When drawing the getting waterproofing on the polished surface at first process it by means of the sanding high-pressure apparatus.
And obstruction of time and fast formation of crystals happens not only towards drawing the getting isolation, but also in the opposite direction. As a result it turns out that the surface is completely protected from negative impact of moisture. The getting waterproofing works at extent of long time and becomes integral part of concrete, increasing its life cycle ten times. But even not this fact belongs to the main advantages of the getting waterproofing. By means of the getting chemical composition it is possible to process surface and underground constructions, communications. The waterproofing does not belong to toxic and highly toxic agents. It can process just filled in concrete or the bases which need repair long ago. It is possible to cause structure from internal and outer end of the bases, basements, tanks with water, pools. By means of the getting waterproofing process rooms with the increased humidity level.
Minuses of the getting waterproofing
When choosing of the getting waterproofing it should be taken into account where it will be used. Producers offer several structures, each of which has strictly limited scope of application.
Surfaces, mouldy, before application of waterproofing carefully clean and cover with anti-septic tank.
Structures for seal of deep seams, for repair and waterproofing are only part of what you will be able to choose. Upon purchase attentively read the instruction and strictly follow it when using of the getting waterproofing. Only then the structure will work really.